B2400 Mobile Drill Heli-Portable

The ultimate choice for your next helicopter-portable project. Unit has been mounted to a 8×8 Argo chassis to allow for self propelled movement when on site. For use on deeper holes, less weight to fly, and where mobbing the rig with the helicopter to and from borehole locations on site is acceptable, The stationary Drilling Skid remains removable and is 72 in L x 50 in. H X 32 in. W weighing 2000lbs. Attainable drilling capacities with respect to bit type, size, and depth, may very according to local subsurface conditions. These are maximum achievable depths in optimal soil conditions.

Features:

4″ Continuous Fight Augers 50 – 75ft [15.2 – 22.9m]
Hollow Stem Auger 50 – 75ft [15.2 – 22.9m]
SPT Sampling 50 – 75ft [15.2 – 22.9m]
Diamond Drilling 75 – 100ft [22.9 – 30.5m]
Honda Gasoline Engine 12 Volt electric start @ 25hp providing the specs below

Specifications:

Pulldown: 1915lbs (869 kg)
Retract: 3142lbs (1425 kg)
Torque: 710lb-ft (98.2 kg-m)
High Range 0: 700rpm – 733rpm
Feed Length: 78 inch (1898mm) to accommodate Solid stem 5ft (1.5m) flight augers or drill rod
Optional Mast: 15ft (4.5m) high, 200lbs (90kg)